Boats

Sign in
Milk Run

2013 Beneteau Oceanis 37 "Grey Goose", Emeryville, CA 94608

7/20
2013 Beneteau Oceanis 37 "Grey Goose"View listing

Ability analysis

Everything below is costed to cross the Pacific.

Specifications

Asking price

$119,000

Length

37.58 ft

Draft

6.23 ft

Capability

5.3

Offshore, of 10

The facts have moved since these costs were worked out

How well it is known changed The figures below still reflect what was known before.

Rebuilt from 56 recorded facts, not from the documents again.
ItemCost estimateProbabilityPriorityProductWhat and whyRangeNotes
$9,000

Replace or underwriter-accepted recertification of standing rigging before departure

$12,000

$0$31k
75%$9,000
weighted into totals
blocks—

—

$8k–$17k

Rigging replacement age is omitted. The 2013 hull's wire will be about 15 years old at March 2028 departure; listing records 2025 spreader replacement and rig re-tune but not new standing rigging.

$1,440

Service in-mast furling mast, boom gear, sheaves and recent spreader work

$1,800

$0$7k
80%$1,440
weighted into totals
blocks—

—

$900–$4k

Listing says furling mainsail and records spreader replacement in 2025 and new boom car in 2024; no in-mast furler service record is given.

$2,380

Refresh mission-critical running rigging and chafe-prone control lines

$2,800

$0$9k
85%$2,380
weighted into totals
blocks—

—

$2k–$5k

Listing does not date running rigging. Original lines would be 15 years old at departure; all lines led aft means long exposed control runs.

$3,575

Replace or major-service undated furling genoa

$5,500

$0$16k
65%$3,575
weighted into totals
blocks—

—

$1k–$9k

Listing documents a new 2022 mainsail but gives no age or condition for the furling genoa; if original, it will be 15 years old at departure.

$2,450

Offshore baseline service of 2012 Yanmar 3YM30, including cooling, belts, hoses, mounts and exhaust elbow inspection

$3,500

$0$13k
70%$2,450
weighted into totals
blocks—

—

$1k–$7k

Engine was serviced 2/20/2026 but hours and service detail are not listed. At departure the engine will be about 16 years old.

$0

No drivetrain replacement planned; prop shaft seal recently replaced

$0

$0$1k
0%$0
weighted into totals
——

—

fixed

Listing records 11/18/2024 bottom job, thru-hull inspection and prop shaft seal replacement; manufacturer specifies stainless shaft line and fixed three-blade propeller.

$900

Fuel sample, filter baseline, fuel-hose date check and tank contamination cleanup if indicated

$1,500

$0$7k
60%$900
weighted into totals
blocks—

—

$500–$4k

Fuel tank is 34 gal rotomoulded diesel tank; listing does not state fuel age, hose dates, filter history or tank cleaning.

$3,200

ABYC-style electrical audit and correction of high-current, charging and shore-power deficiencies

$4,000

$0$17k
80%$3,200
weighted into totals
blocks—

—

$2k–$9k

Boat has inverter, charger, shore power, new 2023 house bank and 2024 start battery, but no wiring diagram, bank capacity, fuse layout or charge-source detail is listed.

$0

No boat-specific battery replacement planned; recent house and start batteries need capacity documentation

$0

$0$1k
0%$0
weighted into totals
——

—

fixed

Listing states new house battery bank in 2023 and new starter battery in 2024. The generic lithium bank, if desired, is centrally priced and not charged here.

$1,210

Inspect and likely refresh wheel steering chain/cable, sheaves and emergency-tiller fit

$2,200

$0$9k
55%$1,210
weighted into totals
blocks—

—

$500–$5k

Manufacturer specifies metal cable steering. Listing gives no steering service record; original system will be 15 years old at departure.

$2,000

Service and test existing autopilot, identify drive and confirm it can steer loaded in offshore conditions

$2,500

$0$13k
80%$2,000
weighted into totals
blocks—

—

$700–$7k

Listing states autopilot but not make/model or drive. The 2013 Beneteau option was Simrad AC42 with gyrocompass; if original it will be unsupported/aging by departure.

$0

No hull laminate repair planned; recent bottom job noted

$0

$0$1k
0%$0
weighted into totals
——

—

fixed

Listing records a 2024 bottom job. Manufacturer specifies monolithic polyester hull, reducing hull-core concern; no impact, blister or structural defect is stated.

$875

No planned keel drop; clean, inspect and locally fair cast-iron keel/seam if survey shows only normal rust

$2,500

$0$15k
35%$875
weighted into totals
——

—

$0–$8k

Manufacturer specifies cast-iron keel with stainless backing plates. Listing does not report keel problems and bottom job was in 2024.

$625

No planned rudder overhaul; service only if survey finds play, stiffness or moisture/weeping

$2,500

$0$15k
25%$625
weighted into totals
——

—

$0–$8k

Manufacturer specifies hung rudder with stainless stock; listing is silent on rudder service and reports no defect.

$3,150

Service winches/clutches and rebed selected leaking or high-load deck hardware

$4,500

$0$22k
70%$3,150
weighted into totals
blocks—

—

$1k–$12k

Balsa-cored deck is 15 years old at departure; listing does not state rebedding history. Oceanis 37 has multiple clutches, winches, tracks, stanchions and deck fittings.

$810

Exercise/service all seacocks and replace hoses/clamps or seized valves found after 2024 inspection

$1,800

$0$17k
45%$810
weighted into totals
blocks—

—

$300–$9k

Listing records thru-hull inspection in 2024 but not materials, count, or repairs. Valves will be 15 years old if original.

$1,625

Baseline domestic-water, sanitation and bilge-pump service

$2,500

$0$13k
65%$1,625
weighted into totals
blocks—

—

$600–$7k

Boat has original-style water tanks, water heater, manual head, holding tank, electric and manual bilge pumps; listing gives no hose/head/water-pump service history.

$1,350

Service electric windlass and verify gypsy, rode, bow roller and load path

$1,800

$0$11k
75%$1,350
weighted into totals
blocks—

—

$500–$6k

Listing states electric windlass but gives no make/model, chain length, chain size, gypsy match, anchor model or service history.

$0

No hull-specific safety-gear cost; advertised bay/coastal safety gear and liferaft are not counted as offshore-ready without service records

$0

$0$1k
0%$0
weighted into totals
——

—

fixed

The central catalogue already prices offshore safety gear. Listing only claims bay/coastal gear and liferaft with no service data.

$1,875

Update, test and selectively repair existing Simrad/B&G electronics suite

$2,500

$0$15k
75%$1,875
weighted into totals
blocks—

—

$700–$8k

Listing shows a substantial electronics suite but no model years, chart currency, AIS class/transmit status, radar type, antenna/SWR results or network health.

$0

No dodger replacement planned; 2023 dodger is recent

$0

$0$1k
0%$0
weighted into totals
——

—

fixed

Listing records a new dodger from The Canvas Works on 9/18/2023 for $5,072.10.

$825

Service hatch and portlight gaskets, latches and minor leaks

$1,500

$0$9k
55%$825
weighted into totals
blocks—

—

$300–$5k

Manufacturer lists multiple hatches, opening portlights and PMMA companionway; listing gives no gasket or leak history.

$0

No hull-specific dinghy or outboard cost; none evidenced aboard

$0

$0$1k
0%$0
weighted into totals
——

—

fixed

Listing does not mention a dinghy, outboard, davits or foredeck chocks. The dinghy/outboard package is centrally priced and should remain in the generic catalogue.

$1,440

Offshore secure-stowage, latch and functional sea-berth preparation

$1,800

$0$9k
80%$1,440
weighted into totals
blocks—

—

$500–$5k

Three-cabin charter-style interior has many lockers and large double berths; listing does not state offshore latches, galley restraints or usable sea-berth setup.