2007 Hunter 41 Deck Salon "INVICTUS", Emeryville, CA (Alameda County)
View listingAbility analysis
Everything below is costed to cross the Pacific.
Specifications
$130,000
41 ft
6.5 ft
5.9
Offshore, of 10
The facts have moved since these costs were worked out
How well it is known changed The figures below still reflect what was known before.
| Item | Cost estimate | Probability | Priority | Product | What and why | Range | Notes |
|---|---|---|---|---|---|---|---|
| $23,500 | |||||||
Replace all standing rigging on the B&R rig, wire and terminals, including unstep and re-step | $17,000 $0$47k | 100% certain | blocks | — | — | $12k–$26k | — |
Removable inner forestay with deck padeye, bulkhead reinforcement and running backstays for twin-headsail running | $6,500 $0$22k | 100% certain | — | — | — | $4k–$12k | — |
| $1,100 | |||||||
B&R rig downwind mitigation: spreader-tip and shroud chafe protection, mainsail chafe patches, spreader weldment inspection | $1,100 $0$4k | 100% certain | blocks | — | — | $500–$2k | — |
| $3,000 | |||||||
Replace all halyards, sheets, topping lift and control lines | $3,000 $0$9k | 100% certain | blocks | — | — | $2k–$5k | — |
| $19,000 | |||||||
Replace mainsail and genoa with offshore cruising Dacron or Hydra Net | $19,000 $0$49k | 100% certain | blocks | — | — | $13k–$27k | — |
| $6,000 | |||||||
Yanmar 4JH4E offshore recommissioning: mixing elbow, heat exchanger, raw water pump, injectors, valve clearance, motor mounts, all hoses | $6,000 $0$20k | 100% certain | blocks | — | — | $4k–$11k | — |
| $2,800 | |||||||
Cutless bearing, shaft seal, coupling and alignment, propeller service, and locktite the shaft fasteners | $2,800 $0$9k | 100% certain | blocks | — | — | $1k–$5k | — |
| $1,700 | |||||||
Fuel tank inspection and polishing, replace all fuel hose, filters and fittings | $1,700 $0$7k | 100% certain | blocks | — | — | $800–$4k | — |
| $2,800 | |||||||
Whitlock direct-drive steering service, rudder bearing inspection and replacement, emergency tiller verification | $2,800 $0$12k | 100% certain | blocks | — | — | $1k–$7k | — |
| $3,600 | |||||||
Haul, strip, fair and repaint the bottom with new anodes | $3,600 $0$13k | 100% certain | — | — | — | $2k–$7k | — |
| $2,200 | |||||||
Pull, inspect and rebed the stainless traveller arch and its deck fittings | $2,200 $0$10k | 100% certain | blocks | — | — | $900–$6k | — |
| $4,500 | |||||||
Replace or fully service all seacocks, through-hulls and hoses, including the air-conditioning raw-water circuit | $4,500 $0$16k | 100% certain | blocks | — | — | $2k–$9k | — |
| $2,400 | |||||||
Renew potable water hose and tank fittings, service both heads, replace sanitation hose | $2,400 $0$9k | 100% certain | — | — | — | $1k–$5k | — |
| $1,100 | |||||||
Pull, through-bolt and rebed the windlass; inspect bow roller, anchor locker and chain pipe | $1,100 $0$5k | 100% certain | blocks | — | — | $500–$3k | — |
| $4,000 | |||||||
Renew dodger, bimini and any sail covers for tropical UV | $4,000 $0$14k | 100% certain | — | — | — | $2k–$8k | — |
| $11,100 | |||||||
Rebed and reseal the deck-salon windows, deck-house seals, six opening hatches, six opening ports and two fixed ports | $8,500 $0$35k | 100% certain | blocks | — | — | $4k–$19k | — |
Fabricate and fit storm covers for the deck-salon windows, with permanent mounting points | $2,600 $0$9k | 100% certain | blocks | — | — | $1k–$5k | — |
| $5,500 | |||||||
Replace refrigeration and the separate front-opening freezer, and rebuild the fridge/freezer divider and box insulation | $5,500 $0$17k | 100% certain | — | — | — | $3k–$9k | — |