Boats

Sign in
Jenny Replacement

2004 Jeanneau Sun Fast 35, Alameda, California

5/16
2004 Jeanneau Sun Fast 35View listing

Ability analysis

Everything below is costed for the west coast, Cabo to southeast Alaska.

Specifications

Asking price

$69,000

Length

35.27 ft

Draft

7.05 ft

Capability

5.4

Cruising, of 10

$272k of uncertainty sits behind 22 unanswered questions.

Answer from the top: these are ordered by how much each one would narrow the range, not by how they occurred to anyone.

  • Has the surveyor found any soft or wet deck areas around stanchions, chainplates, hatches, genoa tracks or winches?

    Localized core repair can dwarf normal winch/clutch service.

    worth $30kask surveyorDeck, hardware and hull–deck joint
  • Does the haul-out show a keel smile, weeping, fresh fairing, grounding damage or rusty/corroded keel bolts?

    A clean keel observation is cheap; keel-joint or bolt work can become a major yard project.

    worth $30kask surveyorKeel and keel bolts
  • Are there photos or diagrams of the AC shore-power inlet, main breaker/ELCI/GFCI protection, charger and battery wiring?

    The coastal use case lives on shore power, so unsafe AC/DC wiring is a fire and corrosion risk.

    worth $25kask ownerElectrical, AC and DC
  • What exact Yanmar model and serial number is installed, and why does the listing say both 29 hp and 3YM20 21 hp?

    The engine is the coastal get-home system; model affects parts, power, value and whether the listing is accurate.

    worth $18kask brokerEngine
  • How many engine hours are on the meter, and can you provide service invoices for the last five years?

    Hours and records separate a simple baseline service from a major peripheral or repower risk.

    worth $18kask ownerEngine
  • When was standing rigging last replaced, and is there a dated invoice from a rigger?

    A documented recent rig can reduce the line to inspection only; unknown/original wire carries full-rerig risk if defects appear.

    worth $18kask brokerStanding rigging
  • Is there bearing play, stock-entry cracking, high moisture, weeping, or vibration under power around six knots?

    Rudder bearing/blade work is a discrete high-cost risk not visible in the listing.

    worth $18kask surveyorRudder and bearings
  • What sails are included, what are their ages/makers/materials, and are there recent loft inspection or repair invoices?

    Primary sails are a major value driver for a Bay boat that is meant to sail every weekend.

    worth $16kask brokerSails
  • How many below-waterline through-hulls are fitted, what material are the valves, and do all handles move freely?

    Seized, brass or unsupported seacocks are a required fix before even coastal use.

    worth $15kask surveyorThrough-hulls and seacocks
  • When was the last haul-out and bottom paint, and are there receipts for blister or structural repairs?

    A clean recent bottom reduces immediate yard spend; unknown bottom condition is a core survey issue.

    worth $15kask ownerHull and laminate
  • Is there any dodger, bimini or cockpit canvas not shown/described, and what is its condition?

    Canvas affects Bay comfort/resale, but should not be priced as required unless it exists and is failed or buyer wants it.

    worth $9kask brokerCanvas, dodger and covers
  • What is the tank material and has a bottom fuel sample been taken recently?

    Contaminated fuel turns a good Yanmar into an unreliable get-home system.

    worth $8kask ownerFuel tanks and system
  • Is any autopilot fitted, and if so what make/model and drive type?

    A working pilot is useful for Bay/coastal two-handed sailing; a helm display without a proper drive may have little value.

    worth $8kask brokerAutopilot and self-steering
  • Is this boat actually wheel-steered, and if so was it factory-built that way or converted from the Jeanneau tiller specification?

    A wheel conversion changes steering, emergency steering, autopilot options and inspection scope.

    worth $6kask brokerSteering gear
  • What propeller, shaft seal/stuffing box and cutless bearing are fitted, and when were they last serviced?

    A simple shaft-drive boat is good coastally, but bearing/seal/prop issues affect motoring reliability.

    worth $6kask surveyorShaft, coupling, prop, stern gland
  • What anchor, chain length/size, rope rode and windlass, if any, are actually aboard?

    The listing only says anchor locker; without details no ground-tackle credit should be given.

    worth $6kask ownerGround tackle and windlass
  • Will the broker allow a hose test of all hatches and ports during survey?

    Leaking hatches drive gasket/rebed/reglaze costs and can hide deck-core damage.

    worth $6kask brokerWindows, hatches and ports
  • When were the winches last stripped and serviced, and do all clutches/traveler/furling controls hold under load?

    Bay sailing uses these systems constantly; service is cheap, hardware replacement is not.

    worth $6kask ownerDeck, hardware and hull–deck joint
  • Are there any freshwater leaks, pump cycling, sanitation odor or known tank issues?

    Plumbing issues are not usually deal-breakers, but sanitation hose/tank access can become surprisingly expensive.

    worth $5kask ownerPlumbing, water tanks and heads
  • What exact B&G chartplotter model is fitted, are charts current, and does the VHF have a valid MMSI/DSC connection?

    Existing electronics may zero catalogue/repair needs only if they power up, transmit and are supportable.

    worth $5kask ownerElectronics and navigation
  • What are the battery ages, chemistry and capacities, and will they pass a load/capacity test?

    Healthy modest batteries are enough for this coastal use; old failed batteries still need replacement.

    worth $3kask surveyorBattery bank
  • Can the swim ladder be deployed by a person already in the water?

    Cold-water self-recovery is a real Bay requirement; a normal boarding ladder may not meet the catalogue MOB ladder requirement.

    worth $800ask surveyorSafety equipment