Boats

Sign in
Milk Run

1979 Tayana 37, Alameda, CA

1/20
1979 Tayana 37View listing

Ability analysis

Everything below is costed to cross the Pacific.

Specifications

Asking price

$40,000

Length

36.67 ft

Draft

5.67 ft

Capability

6.1

Offshore, of 10

24 of 24 systems still unexamined, carrying $21k of reserve.

That figure falls as you inspect — it shrinks because you did the diligence, not because you got optimistic. A system with no assessment counts as unexamined and carries its full allowance.

Systems assessed0%

Identified risks (8)

Discrete events, kept out of the cost ranges so they stay visible and can be retired once you have looked.

  • Teak removal and deck-core reconstruction

    $25k–$95k

    40% likelyexpected $22kinferred

    Reasoning, not a source: The teak overlay is approximately 47 years old and visibly weathered. Tayana owner records document moisture migration, delamination and bulkhead damage, while Bay Area composite labour is published at $140 per hour.

    Tayana Owners Group teak-deck archive“water may eventually get into the cabin and rot bulkheads”

  • Chainplates, studs or supporting knees require structural replacement

    $8k–$30k

    45% likelyexpected $7kinferred

    Reasoning, not a source: Early Tayana chainplates penetrate the deck and can leak into concealed timber-backed attachment structures. The listing gives no replacement evidence.

    Tayana 37 owner discussion“remove the teak fascia to the chainplate bases and inspect carefully”

  • Original black-iron fuel or water tanks require replacement

    $10k–$38k

    65% likelyexpected $14kinferred

    Reasoning, not a source: The 1979 boat falls squarely within the original black-iron-tank era, and no replacement is disclosed. Custom cabinetry may need extensive removal.

    Blue Water Sailing Tayana 37 review“Most of the original fuel and water tanks were black iron”

  • Perkins requires overhaul or complete repower

    $14k–$42k

    35% likelyexpected $9kinferred

    Reasoning, not a source: No model, hours, rebuild date or service history are provided. If it is an original-period Perkins 4.108, the base engine is supportable but the marine installation and auxiliaries may be exhausted.

    Perkins 4.108 parts support“Rebuilt & Ready To Go”

  • Bowsprit, sampson posts, bobstay or associated structure is rotten or fatigued

    $6k–$22k

    35% likelyexpected $4kinferred

    Reasoning, not a source: The design carries forestay loads through substantial exposed timber and metal fittings. The listing photograph shows aged exterior timber but cannot establish structural condition.

  • Bulkhead tabbing or compression structure has water damage

    $7k–$35k

    30% likelyexpected $5kinferred

    Reasoning, not a source: Deck and chainplate leaks can reach structural timber hidden behind extensive interior joinery.

    Tayana Owners Group newsletter“three bulkheads that have gotten wet over the years”

  • Osmotic blistering or prior grounding damage requires laminate work

    $5k–$30k

    25% likelyexpected $4kinferred

    Reasoning, not a source: This is a 47-year-old fiberglass hull with no haul-out photographs, survey history or grounding disclosure. Heavy solid laminate reduces structural concern but not repair cost.

  • Embedded stern-tube fasteners or shaft hardware require reconstruction

    $5k–$20k

    20% likelyexpected $2kinferred

    Reasoning, not a source: Tayana owner documentation describes inaccessible embedded stern-tube fasteners that can break during ordinary bearing work.

    Tayana Owners Group shaft-seal archive“breaking three of the four studs”

Systems to check (24)

  • Standing riggingnot looked at

    No standing-rigging age, material, terminal type, invoices or chainplate work are disclosed. The listing calls the boat a sloop although the standard design is a cutter.

  • Mast, boom and fittingslisting only

    The listing photograph shows an aluminum mast. Mast manufacturer, age, step condition, boom, bowsprit, sampson posts and bobstay condition are unknown.

  • Running riggingnot looked at

    No line ages, diameters, traveller condition, reefing arrangement or spare inventory are disclosed.

  • Sailslisting only

    A mainsail and headsail are visible in the photograph, but inventory, sailmaker, build dates, cloth weights, reef points and inspection history are absent.

  • Enginelisting only

    The seller identifies only a Perkins engine. Model, horsepower, serial number, hours, rebuild history, service records and operating condition are omitted.

  • Shaft, coupling, prop, stern glandnot looked at

    Transmission, shaft, propeller, coupling, cutless bearing, stuffing box and engine-mount details are absent.

  • Fuel tanks and systemnot looked at

    Tank material, location, usable capacity, replacement date, inspection ports and filtration are not disclosed. Original boats commonly used black-iron tanks. inferred

  • Electrical, AC and DClisting only

    The seller claims a new electrical system but gives no date, installer, schematic, wire standard, panel, charging sources, inverter model or invoices.

    Latitude 38 listing“new electrical system and instruments, with solar and wind power”

  • Battery banknot looked at

    Battery chemistry, capacity, age, BMS, starting-bank separation and installation standard are not disclosed.

  • Steering gearnot looked at

    The standard design uses wheel steering, but pedestal, chain, cable, quadrant, rudder stops and emergency steering arrangements are not described.

  • Autopilot and self-steeringnot looked at

    No autopilot or windvane is mentioned. Do not credit the generic autopilot or windvane catalogue lines.

  • Hull and laminatelisting only

    The seller calls the boat well-kept, but provides no survey, haul-out photographs, blister history, repair history or laminate findings. The model has a heavy solid-glass hull.

  • Keel and keel boltsnot looked at

    Published design draft is 5ft 8in with a modified long keel and encapsulated iron ballast. Grounding history and ballast condition are unknown. inferred

  • Rudder and bearingsnot looked at

    The model has a keel-supported rudder, but stock, gudgeons, heel fitting, moisture and repair history are not disclosed. inferred

  • Deck, hardware and hull–deck jointlisting only

    The photograph shows a weathered teak overlay, traditional bulwarks, double lifelines and extensive exterior timber. Teak thickness, core moisture, soft areas and hardware bedding are unknown.

  • Through-hulls and seacocksnot looked at

    No through-hull count, material, seacock type, age or hose-replacement history is disclosed.

  • Plumbing, water tanks and headsnot looked at

    Fresh-water and holding-tank materials, actual capacities, pumps, hoses, water heater and leak history are absent.

  • Ground tackle and windlasslisting only

    The photograph shows a horizontal windlass, chain and bow roller arrangement. Windlass model, operation, chain specification, length and anchor inventory are unknown, so no catalogue credit is awarded.

  • Safety equipmentnot looked at

    No offshore safety equipment, dates or inspection status are disclosed.

  • Electronics and navigationlisting only

    The seller states that instruments are new but gives no brand, model, installation date, network, radar, AIS, VHF or chartplotter details. No catalogue credit is awarded.

  • Canvas, dodger and coversnot looked at

    No dodger, bimini, awning or canvas age and condition are described.

  • Windows, hatches and portslisting only

    The photograph shows traditional ports and teak-framed deck openings. Leak history, glazing material, seals and rebedding dates are unknown.

  • Dinghy and outboardnot looked at

    No dinghy, outboard or stowage arrangement is disclosed.

  • Interior and sea berthsnot looked at

    No interior photographs, layout, berth dimensions, ventilation, refrigeration, LPG installation, leak damage or structural-access information are provided.