2001 Tayana Vancouver 42 "KI", Long Beach, California
View listingAbility analysis
Everything below is costed to cross the Pacific.
Specifications
$139,000
41.75 ft
5.83 ft
7.0
Offshore, of 10
The facts have moved since these costs were worked out
How well it is known changed The figures below still reflect what was known before.
| Item | Cost estimate | Probability | Priority | Product | What and why | Range | Notes |
|---|---|---|---|---|---|---|---|
| $6,450 | |||||||
Expose, inspect and dye-penetrant test the chainplates and their belowdecks attachment bolts, and re-bed the deck penetrations | $5,000 $0$18k | 85%$4,250 weighted into totals | blocks | — | — | $3k–$10k | Cruising World names chainplate and attachment-bolt corrosion as a Vancouver 42 issue; new standing rigging does not prove lower-end chainplates were removed or tested. |
Independent rig survey and documentation of the post-2022 standing rigging, including mast climb and terminal inspection | $2,200 $0$7k | 100% certain | blocks | — | — | $1k–$4k | Standing rigging is listed as replaced since 2022, but the rigger, invoice, wire specification and terminal inspection are not supplied in the listing. |
| $1,700 | |||||||
Inspect the deck-stepped mast step, compression post and partners; check the diamond stay terminals at the upper spreaders | $2,000 $0$9k | 85%$1,700 weighted into totals | blocks | — | — | $800–$5k | Model is deck-stepped with unusual diamond stay; mast wiring and standing rigging were replaced since 2022 but the listing does not say mast was unstepped or mast step inspected. |
| $2,925 | |||||||
Renew halyards, sheets and control lines; strip and service the Profurl headsail furler, the lazy jacks and all winches | $4,500 $0$15k | 65%$2,925 weighted into totals | blocks | — | — | $3k–$8k | Winches were replaced since 2022, lowering that part of the line; halyards, sheets, control lines, Profurl furler and lazy jacks are undated. |
| $1,170 | |||||||
Add a third reef and offshore chafe reinforcement to the 2022 Precision Sails mainsail; recut or reinforce as the loft advises for trade-wind work | $1,800 $0$7k | 65%$1,170 weighted into totals | — | — | — | $800–$4k | The listing's older sail spec says two reef points; it does not state whether the 2022 Precision main was built with a third reef or offshore chafe patches. |
| $6,300 | |||||||
Twenty-six-year service on the original Yanmar 4JH3-TE: heat exchanger, exhaust mixing elbow, turbocharger inspection, injectors, hoses, impeller, belts, alignment | $7,000 $0$26k | 90%$6,300 weighted into totals | blocks | — | — | $4k–$14k | The engine is year 2000 with 2,000 hours; listing claims new mounts and fuel polishing but no turbo, heat-exchanger, exhaust-elbow or injector service history. |
| $1,650 | |||||||
Cutless bearing, shaft, propeller and Yanmar KM-series transmission service | $3,000 $0$12k | 55%$1,650 weighted into totals | blocks | — | — | $2k–$7k | Direct drive, new PSS seal and new motor mounts are good evidence; cutless bearing, shaft, coupling and transmission service are not dated. |
| $2,000 | |||||||
Open, clean and pressure-test both diesel tanks; add inspection ports, a polishing circuit and dual primary filtration | $5,000 $0$18k | 40%$2,000 weighted into totals | — | — | — | $3k–$10k | The listing now says fuel tanks have been polished/cleaned and includes a Racor 500; capacity/material conflict remains, and there is no date, invoice or explanation for the 54gal aluminum tank. |
| $2,975 | |||||||
Audit and remediate the 2022 lithium, inverter and alternator installation to ABYC standard | $3,500 $0$14k | 85%$2,975 weighted into totals | blocks | — | — | $2k–$8k | Lithium bank, Victron inverter/charger, 160A alternator and 1,100W solar are listed, but BMS, fusing, regulator, shunt, solar controllers and installer are not. |
| $2,080 | |||||||
Strip, inspect and re-cable the pedestal steering; service the rudder bearing; fit and sea-trial the emergency tiller | $2,600 $0$10k | 80%$2,080 weighted into totals | blocks | — | — | $1k–$6k | Pedestal steering and emergency tiller are listed but undated and absent from the 2021-22 refit block; at departure the steering gear will be about 27 years old unless records show otherwise. |
| $4,125 | |||||||
Haul out, moisture-survey the hull, strip and renew the bottom with barrier coat and antifoul | $7,500 $0$24k | 55%$4,125 weighted into totals | blocks | — | — | $4k–$13k | No bottom-job date, barrier-coat history or haulout photos are listed; post-1992 vinylester materially lowers blister concern, so this is conditional on bottom condition and paint life. |
| $6,025 | |||||||
Moisture survey of the cored deck, then pull and re-bed all deck hardware, stanchion bases, hardtop and solar mounts, and chainplate deck seals | $8,500 $0$29k | 45%$3,825 weighted into totals | blocks | — | — | $4k–$16k | The deck is cored and has 2022 hardtop/solar/stanchion penetrations, but molded non-skid instead of teak deck and no active leaks are listed. This line is conditional on survey moisture or movement findings. |
Replace 2022 vinyl-coated lifelines with uncoated 1x19 stainless double lifelines | $2,200 $0$8k | 100% certain | blocks | — | — | $1k–$4k | Listing states vinyl-covered double lifelines; the generic catalogue line is not marked aboard because vinyl coating hides corrosion and is not the offshore baseline. |
| $2,100 | |||||||
Replace all seacocks and through-hull fittings, and fit soft plugs at every skin fitting | $6,000 $0$20k | 35%$2,100 weighted into totals | blocks | — | — | $3k–$11k | Listing says seacocks exist on all through-hulls but gives no material, age or operation; reference guidance does not justify blanket replacement unless survey finds seized, pink, cracked, gate-valve or unsupported fittings. |
| $2,100 | |||||||
Pressure-test the two 60-gallon stainless water tanks, renew potable and waste hoses, service the holding tank and add a manual freshwater backup | $2,800 $0$11k | 75%$2,100 weighted into totals | — | — | — | $1k–$6k | Water tanks are stainless and original unless shown otherwise; aft-head plumbing and water heater were replaced since 2022, reducing but not eliminating old-tank/old-hose risk. |
| $880 | |||||||
Lay out, measure and end-for-end the 300ft G4 chain; service windlass and add a secondary anchor rode if absent | $1,600 $0$9k | 55%$880 weighted into totals | — | — | — | $500–$5k | Primary anchor, chain and windlass are strong, but chain age/galvanising, windlass make/service and secondary rode are not stated. |
| $525 | |||||||
Bring the propane installation to ABYC standard: vented locker, solenoid, gas alarm and continuous-run tubing for the Force 10 range | $1,500 $0$7k | 35%$525 weighted into totals | blocks | — | — | $600–$4k | Listing now confirms a vented two-bottle propane locker and remote shutoff; gas alarm, solenoid-at-bottle details, hose/tubing date and continuous run are not stated. |
| $5,575 | |||||||
Re-bed and reseal all aluminium hatches and ports; replace crazed Lexan glazing and renew gaskets | $6,500 $0$24k | 65%$4,225 weighted into totals | — | — | — | $3k–$13k | Aluminum hatches, Lexan windows and opening ports are listed but not included in the 2021-22 refit block; if original, they will be about 27 years old at departure. |
Build offshore companionway boards and retainers to replace or back up the teak louvered companionway doors | $1,500 $0$7k | 90%$1,350 weighted into totals | blocks | — | — | $600–$4k | Listing specifies teak louvered companionway doors and a sliding hatch, but no offshore washboards, storm boards or positive retaining system. |
| $4,650 | |||||||
Service or replace the Grunert 12VDC refrigeration serving both boxes | $4,000 $0$15k | 60%$2,400 weighted into totals | — | — | — | $2k–$8k | Grunert refrigerator/freezer is listed but not included in the 2021-22 refit block; age, refrigerant and compressor data plate are unknown. |
Fit two usable sea berths with lee-cloth anchors and positive locker/galley restraints | $2,500 $0$9k | 90%$2,250 weighted into totals | blocks | — | — | $1k–$5k | Listing gives V-berth and aft stateroom accommodation but no lee cloths or sea-berth restraints; interior layout is semi-custom and must be verified. |